Which of the following routing protocols are classified as a link state routing protocols? Select two answers. Show IS-SI OSPF EIGRP RIP RIPv2 Which of the following terms are often synonymous with or made possible with CIDR? Select two answers. OSPF Classful NAT VLSM Classless VLSM - variable link subnet mask Classless What are the main differences between the OSPF and IS-IS routing protocols? –OSPF Requires an area 0, While IS-IS does not –OSPF Requires an area 0, While IS-IS does not What is the main difference between RIP an RIPv2? – RIP has a limit of 15 hops, while RIPv2 to increases the hot count
limit –RIP is a class full protocol, while RIPv2 Is a classless protocol Which of the following statements about RIP is true?
-RIP uses hop counts as the cost metric A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24. The router is configured to used rip and has learned of networks 192.168.3.0/24. The router is also configured with a static route of 0.0.0.0 with a mask of 0.0.0.0. The router received a package addressed to a network 10.1.0.0/16. What will the router do with the packet? –send the packet out both of it’s directly connected networks as a
broadcast frame – For the packet to the next hop router specified by the route to network 0.0.0.0
Which of the following protocols has a limit of 15 hops between any two networks? EIGRP RIP BGP OSPF IS-IS You have a private network connected to the Internet. Your routers will not share your routing information about your private network with Internet routers. Which of the following best describes the type of routing protocol you would use. Dynamic IGP Link State BGP Distance vector Static IGP - interior gateway protocol What information does the next hop entry in a routing table identify? – The last router in the path to the destination network –The first router in the path to the destination network You have a network configured to use the OSPF routing protocol. – Distance vector – Link state –convergence – Class full – VLSM You have a router configured to share routing information using rip. In addition, you have a single static route that identifies a default route for all other networks. The next top router for the default route has changed. You need to make the change with the least amount of effort possible. What should you do? – Stop and restart in the rip protocol on the
router – Manually Reconfigure the default route to point to the new next hop router Under which of the following circumstances might you implement BGP find your company network and share routes with Internet routers? – If the network has over 15 hops – If the network is connected to the Internet using multiple ISPs A router is connected to network 192.168.1.0/24 and network 192.168.2/24. The router is configured to use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24. The next top router for network 192.168.3.0 has changed. You need to make the change with the least amount of effort possible what you do? – Stop and restart the rip protocol on the
router – Wait for convergence to take place Which of the following routing protocols divides the networking to areas, with all networks required to haven’t area 0 ( Area 0 identifying the backbone area)? EIGRP Humanity server that uses an IP address of 192.168.255.188 with a mask of 255.255.0.0. Which of the following describes the address type? Broadcast Public Classless Multi cast Classfull Which of the following is a characteristic of static routing when compared to dynamic routing? – Routers can only use static routing would not connect to the Internet – All routes must be manually updated on the router Which of the following routing protocols is use by routers on the Internet for learning and sharing routes? RIP BGP OSPF EIGRP IS-IS Which of the following best describes OSPF? –OSPF Is a class full link state routing protocol –OSPF Is a class full distance vector routing protocol –OSPF is a classless distance vector routing protocol –OSPF is a classless link state routing protocol –OSPF is a classless link state routing protocol Which of the following routing protocols is classified as a balanced hybrid routing protocol? IS-IS A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24. The router is configured to used rip and has learned of networks 192.168.3.0/24 and 192.168.4.0/24. There is no default route configured on the router. The router receives a package addressed to network 10.1.0.0/16. What will the router do with the packet? – Hold the package in cache and telling matching route is learned or configured What routing protocols uses relative link cost?OSPF is a link-state routing protocol used for routing within an AS. OSPF uses relative link cost for the metric.
Which of the following is a linkAlso, RIP is an IGP. A link-state routing protocol that uses a metric of cost, which is based on the link speed between two routers. OSPF is a popular IGP because of its scalability, fast convergence, and vendor-interoperability. This link-state routing protocol is similar in its operation to OSPF.
Which of the following is a linkRouting Information Protocol (RIP) is a dynamic routing protocol that uses hop count as a routing metric to find the best path between the source and the destination network. It is a distance-vector routing protocol that has an AD value of 120 and works on the Network layer of the OSI model.
Which of the following routing protocols uses hop count AS its metric?Routing Information Protocol (RIP) is a distance vector protocol that uses hop count as its primary metric.
|