Which action would enable the firewalls to send their pre existing logs to Panorama?

REALIZAR TEST

No hay ningún comentario sobre este test.

Temario:

Which CLI command is used to simulate traffic going through the firewall and determine which Security policy rule, NAT translation, static route, or PBF rule will be triggered by the traffic? check find test sim.
monitoring and security management platforms. The network team has reported excessive traffic on the corporate WAN. How could the Palo Alto Networks NGFW administrator reduce WAN traffic while maintaining support for all existing monitoring platforms? Forward logs from firewalls only to Panorama and have Panorama forward logs to other external services. Forward logs from external sources to Panorama for correlation, and from Panorama send them to the NGFW. Configure log compression and optimization features on all remote firewalls. Any configuration on an M-500 would address the insufficient bandwidth concerns.
A customer wants to set up a VLAN interface for a Layer 2 Ethernet port. Which two mandatory options are used to configure a VLAN interface? (Choose two.) Virtual router Security zone ARP entries Netflow Profile.
An administrator has been asked to configure a Palo Alto Networks NGFW to provide protection against worms and trojans. Which Security Profile type will protect against worms and trojans? Anti-Spyware Instruction Prevention File Blocking Antivirus.
A company needs to preconfigure firewalls to be sent to remote sites with the least amount of reconfiguration. Once deployed, each firewall must establish secure tunnels back to multiple regional data centers to include the future regional data centers. Which VPN configuration would adapt to changes when deployed to the future site? Preconfigured GlobalProtect satellite Preconfigured GlobalProtect client Preconfigured PIsec tunnels Preconfigured PPTP Tunnels.
An administrator has been asked to configure active/passive HA for a pair of Palo Alto Networks NGFWs. The administrator assigns priority 100 to the active firewall. Which priority is correct for the passive firewall? 0 1 99 255.
An administrator pushes a new configuration from Panorama to a pair of firewalls that are configured as an active/passive HA pair. Which NGFW receives the configuration from Panorama? The Passive firewall, which then synchronizes to the active firewall The active firewall, which then synchronizes to the passive firewall Both the active and passive firewalls, which then synchronize with each other Both the active and passive firewalls independently, with no synchronization afterward.
When configuring a GlobalProtect Portal, what is the purpose of specifying an Authentication Profile? To enable Gateway authentication to the Portal To enable Portal authentication to the Gateway To enable user authentication to the Portal To enable client machine authentication to the Portal.
If a template stack is assigned to a device and the stack includes three templates with overlapping settings, which settings are published to the device when the template stack is pushed? The settings assigned to the template that is on top of the stack. The administrator will be promoted to choose the settings for that chosen firewall. All the settings configured in all templates. Depending on the firewall location, Panorama decides with settings to send.
Which method will dynamically register tags on the Palo Alto Networks NGFW? Restful API or the VMWare API on the firewall or on the User-ID agent or the read-only domain controller (RODC) Restful API or the VMware API on the firewall or on the User-ID agent XML-API or the VMware API on the firewall or on the User-ID agent or the CLI XML-API or the VM Monitoring agent on the NGFW or on the User-ID agent.
To connect the Palo Alto Networks firewall to AutoFocus, which setting must be enabled? Device>Setup>Services>AutoFocus Device> Setup>Management >AutoFocus AutoFocus is enabled by default on the Palo Alto Networks NGFW Device>Setup>WildFire>AutoFocus Device>Setup> Management> Logging and Reporting Settings.
Which two virtualization platforms officially support the deployment of Palo Alto Networks VM-Series firewalls? (Choose two.) Red Hat Enterprise Virtualization (RHEV) Kernel Virtualization Module (KVM) Boot Strap Virtualization Module (BSVM) Microsoft Hyper-V.
Which User-ID method maps IP addresses to usernames for users connecting through an 802.1x-enabled wireless network device that has no native integration with PAN-OS software? XML API Port Mapping Client Probing Server Monitoring.
Which PAN-OS policy must you configure to force a user to provide additional credentials before he is allowed to access an internal application that contains highly-sensitive business data? Security policy Decryption policy Authentication policy Application Override policy.
What are two benefits of nested device groups in Panorama? (Choose two.) Reuse of the existing Security policy rules and objects Requires configuring both function and location for every device All device groups inherit settings form the Shared group Overwrites local firewall configuration.
Which Captive Portal mode must be configured to support MFA authentication? NTLM Redirect Single Sign-On Transparent.
An administrator needs to implement an NGFW between their DMZ and Core network. EIGRP Routing between the two environments is required. Which interface type would support this business requirement? Virtual Wire interfaces to permit EIGRP routing to remain between the Core and DMZ Layer 3 or Aggregate Ethernet interfaces, but configuring EIGRP on subinterfaces only Tunnel interfaces to terminate EIGRP routing on an IPsec tunnel (with the GlobalProtect License to support LSVPN and EIGRP protocols) Layer 3 interfaces, but configuring EIGRP on the attached virtual router.
A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch port which it connects. How would an administrator configure the interface to 1Gbps set deviceconfig interface speed-duplex 1Gbps-full-duplex set deviceconfig system speed-duplex 1Gbps-duplex set deviceconfig system speed-duplex 1Gbps-full-duplex set deviceconfig Interface speed-duplex 1Gbps-half-duplex.
If the firewall has the link monitoring configuration, what will cause a failover? ethernet1/3 and ethernet1/6 going down ethernet1/3 going down ethernet1/3 or Ethernet1/6 going down ethernet1/6 going down.
A global corporate office has a large-scale network with only one User-ID agent, which creates a bottleneck near the User-ID agent server. Which solution in PAN-OS software would help in this case? Application override Redistribution of user mappings Virtual Wire mode Content inspection.
Which method does an administrator use to integrate all non-native MFA platforms in PAN-OS® software? Okta DUO RADIUS PingID.
How would an administrator monitor/capture traffic on the management interface of the Palo Alto Networks NGFW? Use the debug dataplane packet-diag set capture stage firewall file command. Enable all four stages of traffic capture (TX, RX, DROP, Firewall). Use the debug dataplane packet-diag set capture stage management file command Use the tcpdump command.
An administrator needs to optimize traffic to prefer business-critical applications over non-critical applications. QoS natively integrates with which feature to provide service quality? Port Inspection Certificate revocation Content-ID App-ID.
A session in the Traffic log is reporting the application as "incomplete." What does "incomplete" mean? The three-way TCP handshake was observed, but the application could not be identified. The three-way TCP handshake did not complete. The traffic is coming across UDP, and the application could not be identified. Data was received but was instantly discarded because of a Deny policy was applied before App-ID could be applied.
An administrator is using DNAT to map two servers to a single public IP address. Traffic will be steered to the specific server based on the application, where Host A (10.1.1.100) receives HTTP traffic and HOST B (10.1.1.101) receives SSH traffic.) Which two security policy rules will accomplish this configuration? (Choose two.) Untrust (Any) to Untrust (10.1.1.1), web-browsing -Allow Untrust (Any) to Untrust (10.1.1.1), ssh -Allow Untrust (Any) to DMZ (10.1.1.1), web-browsing -Allow Untrust (Any) to DMZ (10.1.1.1), ssh –Allow Untrust (Any) to DMZ (10.1.1.100.10.1.1.101), ssh, web-browsing -Allow.
An administrator needs to determine why users on the trust zone cannot reach certain websites. The only information available is shown on the following image. Which configuration change should the administrator make? Opcion A Opcion B Opcion C Opcion D Opcion E.
Which three settings are defined within the Templates object of Panorama? (Choose three.) Setup Virtual Routers Interfaces Security Application Override.
An administrator logs in to the Palo Alto Networks NGFW and reports that the WebUI is missing the Policies tab. Which profile is the cause of the missing Policies tab? Admin Role WebUI Authentication Authorization.
An administrator has left a firewall to use the default port for all management services. Which three functions are performed by the dataplane? (Choose three.) WildFire updates NAT NTP Antivirus File blocking.
An administrator is using Panorama and multiple Palo Alto Networks NGFWs. After upgrading all devices to the latest PAN-OS software, the administrator enables log forwarding from the firewalls to Panorama. Pre-existing logs from the firewalls are not appearing in Panorama. Which action would enable the firewalls to send their pre-existing logs to Panorama? Use the import option to pull logs into Panorama. A CLI command will forward the pre-existing logs to Panorama. Use the ACC to consolidate pre-existing logs. The log database will need to exported form the firewalls and manually imported into Panorama.
A Palo Alto Networks NGFW just submitted a file to WildFire for analysis. Assume a 5-minute window for analysis. The firewall is configured to check for verdicts every 5 minutes. How quickly will the firewall receive back a verdict? More than 15 minutes 5 minutes 10 to 15 minutes 5 to 10 minutes.
VPN traffic intended for an administrators Palo Alto Networks NGFW is being maliciously intercepted and retransmitted by the interceptor. When creating a VPN tunnel, which protection profile can be enabled to prevent this malicious behavior? Zone Protection DoS Protection Web Application Replay.
Which Palo Alto Networks VM-Series firewall is valid? VM-25 VM-800 VM-50 VM-400.
An administrator creates a custom application containing Layer 7 signatures. The latest application and threat dynamic update is downloaded to the same NGFW. The update contains an application that matches the same traffic signatures as the custom application. Which application should be used to identify traffic traversing the NGFW? Custom application System logs show an application error and neither signature is used. Downloaded application Custom and downloaded application signature files are merged and both are used.
Starting with PAN-OS version 9.1, Global logging information is now recoded in which firewall log? GlobalProtect System Authentication Configuration.
Which will be the egress interface if the traffic's ingress interface is ethernet 1/7 sourcing from 192.168.111.3 and to the destination 10.46.41.113? ethernet1/6 ethernet1/3 ethernet1/7 ethernet1/5.
Which three authentication services can administrator use to authenticate admins into the Palo Alto Networks NGFW without defining a corresponding admin account on the local firewall? (Choose three.) Kerberos PAP SAML TACACS+ RADIUS LDAP.
Which event will happen if an administrator uses an Application Override Policy? Threat-ID processing time is decreased. The Palo Alto Networks NGFW stops App-ID processing at Layer 4. The application name assigned to the traffic by the security rule is written to the Traffic log. App-ID processing time is increased.
Which Security policy rule will allow an admin to block facebook chat but allow Facebook in general? Deny application facebook-chat before allowing application facebook Deny application facebook on top Allow application facebook on top Allow application facebook before denying application facebook-chat.
A client is concerned about resource exhaustion because of denial-of-service attacks against their DNS servers. Which option will protect the individual servers? Enable packet buffer protection on the Zone Protection Profile. Apply an Anti-Spyware Profile with DNS sinkholing. Use the DNS App-ID with application-default. Apply a classified DoS Protection Profile.

Which action should be taken to enable the firewalls to send their pre existing logs to Panorama?

How does Panorama connect to firewall?

What is Panorama firewall?

What are the differences between using a service versus using an application for security policy match?